Turn key-switch on LOFA control from “OFF” to “RUN” position.
The electric fuel pump for priming will operate for approx. 10 seconds. Turn the key-switch to "OFF" & then back to "RUN" to reactivate electric fuel pump for additional 10 sec, if extended priming is required or engine
fails to start.
After a few seconds in the "RUN" position the lower indicator lights will go off.
Engine preheating is shown by the illuminated “PREHEAT” indicator light (second from top) and will remain on until preheating is complete.
When the “PREHEAT” indicator light (second from top) goes off move the key-switch to "START" and release once engine starts.
If the engine starts but fails to run or it fails to start then repeat this process.